Köp Refurbished Zortrax M200


Refurbished Zortrax M200

Ska du köpa Refurbished Zortrax M200 ? Vi listar produkter från både stora och små e-handlare, från kända varumärken, för att ge dig ett stort urval för din köpprocess.

Refurbished products come from customer returns, demo units, transport damages, open boxes etc... They are verified to work properly. All Accessories, (original or comparable substitutes) shall be in the package and if there is something missing we write this under "Refurbish notes". All refurbished products sold by 3D-Prima also include a warranty for 6 months. Outer packaging can be different than the original one. There can also be some marks on the product since it have been opened and used. If there are any differences or damage that differs from a new device, it is mentioned below. Refurbish notes: Guide tube to the filament is missing. The printer works fine without. Otherwise it is as new. Plug & createNo complicated calibration of the printer or software necessary. Just turn the printer on, upload the model and start printing. ExtruderProperly selected heating and cooling points in the extruder solve the common problem of inability to release material by the extruder. It can be caused by a change in the physical properties of material associated with temperature. Build platformUse of a two-part platform allows for its easy removal after the printing process is finished. Thanks to this feature, the model can be easily removed without causing any calibration issues. Perforations on the platform allow to print using materials based on ABS which have a tendency to warp. They prevent the model from peeling off during printing process. Additionally, an extra layer of raft is used as a special base for the object. This is very important for printing large models. The platform is heated to the correct temperature for each type of filament. Wide range of temperatures (from 20° C to 110° C) allow to print using many kinds of materials. Auto-calibrationThe printer is fitted with an innovative calibration system which makes sure that the platform is leveled correctly every time. There are calibrating points located on the platform itself which calculate its exact position. The system is able to determine on which level the calibrating points should be located. In the case of a slight tilt the extruder is able to adapt to the position of the platform while its putting on the first layers of the model. X and Y axis systemA system of dual X and Y axises is used to lead the extruder with high precision. Stability and quality of printing is greatly improved through the use of 8 smooth rods. Single Extruder SupportEase of use thanks to Single Extruder Support system (SES) which allows to print support structure for complex models without the need of dual extruder and additional material. Support structure is easy to remove and efficient. The system is optimized to use only the exact amount of mater
17990 kr