Ska du köpa Zortrax M200 3D Skrivare ? Vi listar produkter från både stora och små e-handlare, från kända varumärken, för att ge dig ett stort urval för din köpprocess.
We are listening to the voice of community! The newest Z-SUITE version 1.10 introduces the external materials feature. From now on, you will be able to experiment with 3rd parties materials. Just remember, only Zortrax Materials guarantee the best in-class printing quality. NEW! Plug &, create No complicated calibration of the printer or software necessary. Just turn the printer on, upload the model and start printing. Extruder Properly selected heating and cooling points in the extruder solve the common problem of inability to release material by the extruder. It can be caused by a change in the physical properties of material associated with temperature. Build platform Use of a two-part platform allows for its easy removal after the printing process is finished. Thanks to this feature, the model can be easily removed without causing any calibration issues. Perforations on the platform allow to print using materials based on ABS which have a tendency to warp. They prevent the model from peeling off during printing process. Additionally, an extra layer of raft is used as a special base for the object. This is very important for printing large models. The platform is heated to the correct temperature for each type of filament. Wide range of temperatures (from 20° C to 110° C) allow to print using many kinds of materials. Auto-calibration The printer is fitted with an innovative calibration system which makes sure that the platform is leveled correctly every time. There are calibrating points located on the platform itself which calculate its exact position. The system is able to determine on which level the calibrating points should be located. In the case of a slight tilt the extruder is able to adapt to the position of the platform while its putting on the first layers of the model. X and Y axis system A system of dual X and Y axises is used to lead the extruder with high precision. Stability and quality of printing is greatly improved through the use of 8 smooth rods. Single Extruder Support Ease of use thanks to Single Extruder Support system (SES) which allows to print support structure for complex models without the need of dual extruder and additional material. Support structure is easy to remove and efficient. The system is optimized to use only the exact amount of material needed to support the model. Compatible materials Print using Z-Filaments with features dedicated for Zortrax® M200 results guartanteed. Buy your Zortrax filament here For even better results, don´t forget the side covers.